Classic™ Step-to-Straight - Fiberglass - Type 1A - 300 Lbs. Rated

Versatile all-purpose nonconductive ladder converts quickly from a step ladder to a push-up extension ladder. Extra heavy duty, 300 Ib. rated for heavy Industrial use. Flared front section with flat steps. Replaces FC1000 series ladders: FC1006, FC1007, FC1008.

Features

• Hinging Mechanism - Exclusive guide lock brackets form solid spreader braces when the unit is in the step ladder position and slide guides when extended. Extra heavy duty plated steel.
• Standard Pole Grip - Web pole grip to hold top of ladder against poles, pipes or corners.Made of flexible high strength dacron webbing with a 5" section of corrugated rubber tread.
• Utility-Style Safety Shoes - Heavy aluminum casting with thick wrap-around rubber tread on Iower end of both sections. Used by utilities for solid footing at differing angles. Replaceable.
• Rung Lock - Heavy duty aluminum rung cradle for easy set-up in extended position. 11 1/2" wide rung support spreads the load over entire width of rung.
• Double-Rivet Step Construction - Each step secured with six, iarge headed, semi-tubular steel rivets for maximum strength. 30% greater shear strength than solid aluminum rivets.

Classic™ Extension Trestle - Fiberglass - Type 1A - 300 Lbs. Rated

Extra heavy duty and nonconductive 300 lb. rated extension trestle for free-standing extension needs. Also ideal for use with scaffold planks. Designed to accommodate planks up to 14" wide when trestles are used in pairs. Fly section is not designed for use as a single ladder. Replaces FX1000 series ladders: FX1008, FX1010, FX1012.

Features

• Heavy Trestle Top Hinge - Extra heavy plated steel hinges form top of trestle and support slide guides for the fly section.
• Slide Guides & Spreader Braces - Plated steel spreader braces interlock with bottom pair of fly section slide guides. Steel backup washers and reinforcing back plates prolong life at key pivot points.
• Locking Bail - Hinged steel bail provides easy to use solution for locking fly section in place. Fly section can be raised or lowered in 12" increments without closing the trestle.
• Double-Rivet Step Construction - Each step secured with six, iarge headed, semi-tubular steel rivets for maximum strength. 30% greater shear strength than solid aluminum rivets.
• Channel & l-Beam Fiberglass Rail - Nonconductive full channel rails are covered with a polyester veil for years of service without fiber prominence or blooming.
• Slip Resistant Rubber Feet - Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Rubber tread can be replaced when necessary.

Classic™ Shelf Ladder - Fiberglass - Type 1A - 300 Lbs. Rated

Extra heavy duty, 300 lb. rated shelf ladder for all demanding Industrial applications. Steps are level when the ladder is set at 18 degrees. Nonconductive fiberglass side rails with fully serrated aluminum steps.

Features

• Rubber Bumper - Ladder has parallel sides with thick rubber bumpers extending 6" down the side rails.
• Heavy Gusset Bracing - Two pair of gussets support bottom step. All gussets are heavy duty steel.
• Slip Resistant Rubber Feet - Aluminum angle feet with thick rubber tread on both legs to provide sure footing. Feet can be replaced when necessary.
• Double-Rivet Step Construction - Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. 30% greater shear strength than solid aluminum rivets.

Tripod Ladder - Fiberglass - Type 1A - 300 Lbs. Rated

Our Type 1A special purpose fiberglass tripod, designed to meet demanding non-conductive tripod ladder applications. Replaces FT2000 series ladders: FT2004, FT2005, FT2006, FT2007, FT2008, FT2010, FT2012.

Features

• Reinforced Outrigger - Long outrigger supports spread out the base for extra stability.
• Center-Pull Spreader Brace - Unique center-pull spreader brace designed for one-hand operation. Brace is plated steel for extra strength and durability.
• Molded Outrigger Rail End Caps - Provides smooth non-jagged surface at outrigger/ladder connection.

The Ultimate® Articulated Ladder - Fiberglass - Type 1A - 300 Lbs. Rated

Extra-heavy duty, 300 lb. rated fiberglass articulated ladder. Multiple uses: can be used as a straight ladder, step ladder, scaffold, or table. Designed for a 250 Ib. workload when set at the proper working angle. Replaces the Big Louie FA1000 series ladders: FA1012 and FA1016.

Features

• Hefty Hinge™ - Reliable, quick-activating snap-lock hinges permit easy, one-man set-up. The advanced design and rugged engineering of the Hefty-Hinge™ provides stability and versatility for the most demanding jobs. Patent #5279387
• Dual Stabilizer Bars - Easy-to-attach stabilizer bars with slip-resistant rubber feet help keep ladder in place during use.