Rhino™ 375 - Aluminum - Type 1AA - 375 Lbs. Rated

Louisville's Top-of-the-Line "Rhino 375™" aluminum step ladder. Extra heavy duty, 375 lb. rated ladder with rugged extruded aluminum side rails. Designed and built to assure years of dependable, service to everyday ladder users.

Features

• Molded Top With Recessed Tray - Nonconductive structural molded top. Large parts tray recessed 1/4" deep with tool slots. Heavy cast aluminum top used on models above 12'.
• Inside Spreader Braces - Spreader braces located inside of side rails protect braces from getting hooked or abused in transit.
• Side Rails - Heavy duty aluminum side rails are full channel extrusions on the front and back legs.
• Slip Resistant Rubber Feet - Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Rubber tread can be replaced when necessary.
• Reinforcement Plates - Front and back doublers under the molded top provide extra reinforcement at critical wear points.
• Heavy Gusset Bracing (Every step and back brace) - Braces located every 12" on models under 8' tall. Two pair of steel gussets on every step for extra support. Heavy duty steel gussets on each angle back brace.

Master™ - Aluminum - Type 1A - 300 Lbs. Rated

Louisville's Top-of-the-Line "Master™" aluminum step ladder. Extra heavy duty, 300 lb. rated ladder with rugged extruded aluminum side rails. Designed and built to assure years of dependable, service to everyday ladder users.

Features

• Molded Top With Recessed Tray - Nonconductive structural molded top. Large parts tray recessed 1/4" deep with tool slots. Heavy cast aluminum top used on models above 12'.
• Inside Spreader Braces - Spreader braces located inside of side rails protect braces from getting hooked or abused in transit.
• Side Rails - Heavy duty aluminum side rails are full channel extrusions on the front and back legs.
• Slip Resistant Rubber Feet - Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Rubber tread can be replaced when necessary.
• Reinforcement Plates - Front and back doublers under the molded top provide extra reinforcement at critical wear points.
• Heavy Gusset Bracing (Every step and back brace) - Braces located every 12" on models under 8' tall. Two pair of steel gussets on every step for extra support. Heavy duty steel gussets on each angle back brace.

Champion™ - Aluminum - Type 1 - 250 Lbs. Rated

Heavy duty, 250 lb. rated Industrial stepladder. A real workhorse for heavy duty use by contractors and industry.

Features

• Molded Top With Recessed Tray - Nonconductive structural molded top provides greater impact resistance and durability than aluminum tops. Large parts tray recessed 1/4" deep with tool slots.
• Pinch Resistant Spreader Braces - Heavy duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Steel backup washers and reinforcing back plates prolong life at key pivot points.
• Side Rails - Heavy duty aluminum side rails are full channel extrusions on the front and modified channel on back legs.
• Slip Resistant Rubber Feet - Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Shoes can be replaced when necessary.
• Wide Back Braces - Vertically mounted U-shaped back braces provide maximum stiffness and discourage unsafe climbing. Braces located every 12" on models under 8'.
• Optional Molded Pail Shelf - Self-closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. The AS2100 series replaces the AS2000 series ladders: AS2002, AS2003, AS2004, AS2006, AS2008, AS2010.

*AS2002 is a folding step stand.

Click to Enlarge

Sentry™ - Aluminum - Type 1A - 300 Lbs. Rated

Extra Heavy duty, 300 lb. rated Industrial step ladder. Ideal ladder for painters and light/general Industrial users.

Features

• Molded Top With Tool Slots - Rugged, nonconductive structural molded top is extremely strong and durable. Molded slots help keep tools close at hand.
• Molded Pail Shelf - Self-closing, structural molded pail shelf. Non-skid surface and outer retaining edge provide additional features.
• Center-Pull Spreader Braces (3 thru 6 ft. only) - Unique center-pull spreader brace for easy one-hand operation. Brace is plated steel for stiffness and durability.
• Slip Resistant Rubber Feet - Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Rubber tread can be replaced when necessary.
• Side Rails - Heavy duty aluminum side rails are full channel extrusions on the front and back legs.